Termékek vásároljon hegesztő gázt közelben (112)

Con l'ASO 920 è possibile fresare in maniera rapida e precisa anche gli smussi di saldatura più difficili come l'incavo a tulipano. In questo ambito di applicazione questa macchina automatica per la fresatura di bordi convince al 100%. Motore:5,5 kW | 0-900 giri/min Energia:400 V, 50/60Hz Max movimento di avanzamento sugli assi X / Z:90 mm / 100 mm Regolazione dell'angolo:0° - 30° rispetto alla verticale Spessore del pezzo:8 – 100 mm Peso:420 kg N° articolo:58725

Robust and maintenance-free 90° magnetic clamping angle for flat material. The permanent magnet welding angle is a classic from Assfalg for welding and assembly work on flat material. It is available in two sizes, with a base length of 200mm and 300mm. SW200:Item No. 46504 SW300:Item No. 46503

Con la ASO 930 | ASO 930 Plus ahora también es posible fresar el frontal y la parte inferior de una pieza de trabajo. Ya no es necesario girar la pieza. Con el fresado a bajas revoluciones se consigue aumentar la vida útil de la herramienta. Áreas de aplicación: - Idóneas para piezas pesadas, largas y de gran superficie - Fresa el frente y la parte inferior en un ángulo de 0° – 76° con anchos de fresado de 74 mm - Uso preferentemente móvil sobre el carro con ruedas, pero también con apoyo de grúa o fija Características: - Ajuste fácil de bisel y de ángulo - Regulación automática del avance, dependiendo del material, de 0 – 1,2 m/min - Estable construcción de fundición-acero - Mesa de trabajo templada con ruedas guía - Altura de trabajo 820 – 970 mm ASO 930:60269 ASO 930 Plus:67019

Fixed 90° welding angle with two switchable and removable magnet modules that can be used separately as well. The A90 can be used for aligning heavy and larger steel plates with precision in a 90° angle. This magnetic welding angle can be used as an inside and outside angle. Magnet modules can be removed and used separately. A total of four versions can be chosen from, which are different in their holding forces. Magnetic welding angles with rotating magnetic modules that can be completely shut off. Your compact helper for welding or assembly works, for round and flat materials. The angles can be set exactly using the engraved scales. The Boomer magnetic welding angles from Assfalg are available in 3 different sizes, which are different significantly in their holding forces. They make it possible to align heavy and larger workpieces both on the inner and on the outer side and to clamp them accurately. A90-165:Item No. 61945 A90-400:Item No. 60340 A90- 600:Item No. 60341 A90-1000:Item No. 60342 BA 150:Item No. 60344 BA 400:Item No. 60345 BA 600:Item No. 60346

Bei diesen robusten und wartungsfreien Schweißwinkel können Werkstücke aus Metall bei 90° gehalten werden. Werkstücke lassen sich leicht positionieren, ausrichten und fixieren. MS 2-80:Art. - Nr. 48192 MS 2-90:Art. - Nr. 18736

Supporto universale per la fresatura e per il montaggio. La forza magnetica agisce su 3 lati. Può anche essere utilizzato come supporto d’angolo magnetico A90 e al Boomer. Dispone di diversi fori filettati come opzioni di fissaggio. MSQ 165:N. 61939 MSQ 400:N. 60971 MSQ 600:N. 60972 MSQ 1000:N. 6097

Massemagnete sind ein äußerst hilfreiches Werkzeug, um schnellstens und flexibel die Erdung zum Schweißgerät mit einer Schalterdrehung herzustellen ohne dazu geeignete Klemmbereiche für die üblicherweise verwendete Schweißklemme suchen zu müssen. 300 A:Art. - Nr. 62088 600 A:Art. - Nr. 61985 800 A:Art. - Nr. 64698

La herramienta indispensable en trabajos de soldadura y de montaje de material plano y redondo con un ángulo de 90°. El ayudante compacto en trabajos de soldadura y de montaje de material plano y redondo con ajuste individual del ángulo. A90-165:Nº art. 61945 A90-400:Nº art. 60340 A90-600:Nº art. 603 A90-1000:Nº art. 60342 BA 150:Nº art. 60344 BA 400:Nº art. 60345 BA 600:Nº art. 60346

The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece bottom edge up to a chamfer length of 74mm can be performed by the machine effortlessly without any thermal change to the material. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 75°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No thermal change to the material V-, X-, K-, I- or Y- seams possible Very long operating life and cutting performance Gradual feed adjustment depending on material from 0 - 1. ASO 930:60269 ASO 930 Plus:67019

Queste fresatrici automatiche per bordi sono ideali per creare grandi smussi di saldatura con angoli da 15° a 80°. Queste macchine utensili sono molto resistenti e dimostrano la loro forza su qualsiasi materiale. Grazie alla fresatura a basso regime si raggiungono durate utili estremamente elevate. ASO 900:42699 ASO 900 Plus:63133 ASO 900 Plus-Bigger:64909

The Magsquare represents a universal welding and assembly aid. The magnetic force acts on 3 sides. The system can be switched off through a simple 180° rotation of the switch lever. It can also be used as an addition to the magnetic welding angles A 90 and Boomer. Several thread drill holes are already present as mounting options. Four versions can be chosen from, which are different in their holding forces and dimensions. The magnet squares are suitable for round and square workpieces. MSQ 165:Item No. 61939 MSQ 400:Item No. 60971 MSQ 600:Item No. 60972 MSQ 1000:Item No. 60973

The automatic weld-chamfering machines from the ASO 900 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 53mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 15° - 80°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No change to material properties, through heat dissipation via chip V-, X-, K- or Y- seams possible ASO 900:42699 ASO 900 Plus:63133 ASO 900 Plus-Bigger:64909

Die Schweißkantenformer /-Fräsen scheren mit Hilfe eines Schneidrades, völlig selbstfahrend, die Kante geräuschlos und staubfrei ab und hinterlassen eine grobe Fase. Sie erzeugen perfekte Schweißkanten mit bestem Preis / Leistungsverhältnis. Sie sind in der Lage sowohl Platten und Rohre, einschließlich großer Durchmesser zu fasen als auch kleine Teile und Rohre mit geringer Stärke. CHP 12:24353 CHP 07:35333

Il tuo tuttofare universale per piccoli lavori di saldatura e di assemblaggio per pezzi rotondi e piani. Tutti le squadre magnetiche sono dotate di azionamento e sono adatte a particolari piatti e tondi, ad eccezione dei modelli SW. I modelli MAV 120 e PA 200 sono versioni ad angolo regolabile. MSA I:N. 45338 MSA II:N. 45339 MS 2-80:N. 48192 MS 2-90:N. 18736 MAV 120:N. 162 PA 200:N. 60343 SW 200:N. 46504 SW 300:N. 46503

Each side can be switched separately with this magnetic welding angle. They are suitable for round and flat material. Metal workpieces can be held at 90° with this durable and maintenance-free welding angle. Workpieces can be easily positioned, aligned and fastened. MS 2-80:Item No. 48192 MS 2-90:Item No. 18736

These ferrous welding angles are your indispensable third hand during welding and assembly work on round and flat material. With these small and handy ferrous welding angles, metal workpieces can be held at angles of 45° and 90°. They are durable, maintenance-free and can be used with a temperature of up to 80 °C. Workpieces can be easily positioned, aligned and fastened. MSA I:Item No. 45338 MSA II:Item No. 45339

Die automatische Schweißkantentfräsmaschine CHP 21G ist für den stationären und transportablen Einsatz in der Schweißnahtvorbereitung vorgesehen. Ein Schneidrad schert die Kante geräusch- und staubarm ab und hinterlässt eine raue Fase. Sie ist extrem robust und für den Dauerbetrieb geeignet. Sie liefert gleichbleibende und hohe Qualitätsfasen im Blechschweißvorbereitungsprozess. Fasenwinkel:20° bis 45° max. Fasenbreite :28 mm Blechbreite:min. 70 mm

Ihr universeller Handlanger bei Schweiß- und Montagearbeiten an Flachmaterial. Der gewünschte Winkel zwischen 30° und 270° ist mit dem beiligenden Inbussschlüssel einstellbar. Abmessungen [LxBxH]:190 x 50 + 150 x 50 mm Winkel:30° - 270° Schaltbar:Nein Haftkraft:100 mm Gewicht:2,0 kg Art.-Nr.:22318

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material Motor:5.5 kW | 0 – 900 rpm Energy:400 V, 50/60 Hz Maximum feed traverse in X- / Z-axes:65 mm / 15 mm Angular adjustment:90° - 75° Workpiece thickness:8 - 100 mm Weight:390 kg Item no.:64247

La fresadora automática de bordes ASO 910 realiza fresados de planos y biselado de cantos. Debido a su robusto diseño, la máquina alcanza una anchura de fresado de hasta 50 mm y una profundidad de talón de hasta 15 mm. Esta máquina es única en su categoría. Motor:5,5 kW | 0 – 900 r.p.m. Energía:400V, 50/60Hz Acercamiento máx. en el eje X/Z:65 mm / 15 mm ajuste de ángulo:90° - 75° Espesor de la pieza de trabajo:8 - 100 mm Peso:390 kg Nº art.:64247

These magnet welding angles can be gradually adjusted in their angle from 30° to 275°. Every leg can be switched separately. These magnet clamping angles hold round and square tubes and flat material secure. Thanks to the engraved scale and the quick release, the angles can be quickly and precisely set. MAV:Item No. 162

Votre troisième main indispensable pour les travaux de montage et de soudure sur le matériau plat et rond d'un angle de 90°. Votre assistant compact lors des travaux de soudure et de montage sur le matériau rond et plat pour le réglage personnalisé de l'équerre. A90-165:Réf. 61945 A90-400:Réf. 60340 A90- 600:Réf. 60341 A90-1000:Réf. 60342 BA 150:Réf. 60344 BA 400:Réf. 60345 BA 600:Réf. 60346